A 65-inch TV on the wall looks great — until it's crooked, or the cords dangle, or it's anchored into drywall instead of studs. We mount TVs the right way: located studs, rated hardware, perfect level, cables hidden.
We install fixed, tilting and full-motion mounts over fireplaces, in bedrooms, gamerooms and covered patios. Bring-your-own mount or we'll supply one matched to your TV's size and weight.
We scan for studs, wiring and plumbing, then tape out the TV footprint at your preferred height, checking seated sightlines and glare from windows before a single hole gets drilled in the wall.
The mount is matched to your TV's VESA pattern and weight with margin to spare, then lagged into studs or masonry with hardware rated far beyond the load it will ever carry.
Power and signal cables are routed through in-wall kits or raceway, soundbars and streaming boxes get connected and configured, and every input is labeled so the remote does what you expect.
We torque all fasteners, set the TV dead level, lock full-motion arms at your preferred resting position, wipe the screen and walk you through tilt, swivel and cable slack before packing up.
A growing share of our Fulshear mounting calls are flex-room offices — remote workers along the FM 1093 corridor mounting a second display or a wall-mounted conference screen in the study. We also unmount and remount TVs for families upgrading sizes, reusing the existing chase and patching the old bracket holes so the wall looks untouched.
Mounting cost in Fulshear moves with wall type, height and concealment more than TV size. A shiplap or paneled accent wall takes extra care to drill cleanly; stacked-stone fireplaces need masonry bits and slower anchoring. Two-story wall placements above stair landings require taller ladders and a second set of hands. In-wall cable concealment adds time, as does relocating a TV from a previous home and patching the old holes. Bundling several rooms into one visit lowers the per-TV cost noticeably.
Standard stud mounting starts around $99–$149. In-wall cord concealment or over-fireplace installs typically add $75–$150. Exact quote up front.
Yes — we use in-wall rated power and cable kits that meet electrical code, so you get a completely clean look without an electrician's visit.
We do. We use masonry anchors rated well above your TV's weight and drill through mortar joints where possible so the stone stays intact.
Yes — we locate the studs behind the planking, drill pilot holes through the boards cleanly to prevent splitting, and use standoff spacing so the mount clamps tight without crushing the trim. The finished install looks fully intentional, like the wall was built for it.
Usually, with checks: we verify mantel heat deflection, measure wall temperature above the firebox, and recommend a tilting or pull-down mount to correct the viewing angle. If your fireplace throws too much heat at the wall cavity, we will say so honestly before mounting anything.
Call or text a photo of the job — upfront quote today, most work scheduled within days.
Call (281) 595-9807 Text a Photo